Adc HiGain H2TU-C-319 List 4E Uživatelský manuál stáhnout pdf (Strana 29)

LTPH-UM-1049-02, Issue 2 Provisioning

H2TU-C-319 List 4E January 9, 2002 21

Active DS1 Port

See “Dual DSX-1

Port Option” on

page 31.

ADS1 MUX The MUX mode selects the DSX-1 (MUX) port as the active source for the DS1

Signal to transmit to the HSDL Line Port #1.

An AIS signal is sent to the auxiliary Port #2. Equalizer settings apply to the

MUX DSX-1 port. The AUX equalizer is set to 0.

AUX The AUX mode selects the auxiliary DSX-1 Port #2 as the active source for

DS1 signal to transmit to the HDSL Line Port.

In this case, the MUX port is used as a monitor or splitting device for electrical

test access. Equalizer settings apply to the AUX DSX-1 port. The MUX

equalizer is set to 0.

CTHR Activates the Cut-through mode. This mode electrically connects the MUX

port to the AUX port and the H2TU-C operates as a cut-through card.

This is used when one tributary from the Wideband 3190 MUX card is required

to appear at the DSX-1 interface to the local central office. Equalizer settings

apply to the MUX DSX-1 port. The AUX Equalizer is set to 0.

Table 6. H2TU-C-319 List 4E ADC Config Menu Options (Continued)

ADC Config Menu

Options

Front-Panel

Display

Code

Selection Description

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 87 88

Žádné komentáře

Adc HiGain H2TU-C-319 List 4E Uživatelský manuál Strana 29